iliGHT : interactive table

Immersion innovates at Imagina

2011-02-16T06:41:00.000-08:00

Imagina took place in Monaco from February 1st to 3rd. It is the main European Show for te firms who need 3D conception and decision help solutions. It is also an ilmportant show for architects and the health sector.

Immersion shared two booths, one with Arts et Métiers ParisTech, the othe one with Diginext. On the first booth Immersion showed the Cubtile and presented then, in collaboration with ENSAM Cluny, the LITE (Light Immersive Transportable Environment), entirely designed by Immersion. The LITE virtually navigates into the Cluny Abbey. On the second booth, Immersion presented exclusively the iliGHT 3D-Touch.

For the first time in Europe, Immersion introduced to Imagina visitors the iliGHT 3D-Touch table. It permits two users to visualize the same 3D model with their own viewpoint, as if it was in a real mockup. This 3D multitouch system combines a multitouch collaborative interface with 3D immersive visualization techniques: the multiview technology. The iliGHT 3D-Touch table uses stereo head tracking with NVIDIA surround glasses.

iliGHT 3D-Touch table use on Diginext's booth (Copyright: Immersion)

As for the Cubtile, showed on the common booth Immersion-ENSAM Cluny, it is the first multitouch 3D device at your fingertips. It allows, due to its multitouch 3D tactile technology, intuitive manipulation of 3D objects displayed on a screen. During the Cubtile's conception and realization, Immersion wished to create a multitouch 3D device adapted to professionals and individuals.

Cubtile demo with the Paray great door (Copyright: Immersion/Imagine (ParisTech))

Finally, it is possible to visit the Cluny Abbey today, entirely, thanks to the LITE. This immersive room, designed by Immersion, is unique in France. It allows navigating on scale 1 into a virtual building mock up in order to grasp the high volumes. The LITE is in the Cluny Abbey (Bourgogne), in the Arts et métiers ParisTech.

Immersion in the Principality of Monaco thanks to the LITE (Copyright: Immersion/IGO)

Imagina was an upbeat for the whole Immersion team and its partners who met the public and its expectations. TF1 and Euronews dedicated reports to Imagina where Immersion could be seen. Meet Immersion on its booth at Laval Virtual from April 6th to 8th.

iliGHT 3D Touch, the stereo multitouch multiusers table official video of has just gone out

2010-09-29T02:29:00.000-07:00

With it, discover or rediscover the interactive table forms of use, improved by new features making possible the 3D display on tactile table and the collaborative dumping around a model. You can also perceive some other utilizing tracks of these new features.

The stereo multitouch multiusers table

2010-07-23T01:23:00.000-07:00

From 25 to 29 July 2010, Immersion flies to Los Angeles on the occasion of Siggraph 2010, International Conference and Exhibition on Computer Graphics and Interactive Techniques, to introduce a multitouch solution that enables multiview stereoscopy for collaborative exploration of mockups. Chosen among “Emerging Technologies”, Immersion will present an exclusive demonstration titled: « 3D Multitouch: When Tactile Tables Meet Immersive Visualisation Technologies ».

Developed within the framework of an european research project, V-City, the 3D multitouch application aims at researching, developing and validate an innovative system for the reconstruction, visualization and exploitation of large 3D urban environments. This demonstration associates a collaborative multitouch intuitive 2D interface with three-dimensional visualization solutions. Thus, two users can collectively explore a 3D city where everyone has his own point of view of the scene, as it would be with a real mockup.

"This is not so much the use of touch and multi-view which is original, as their combination within a single interface, with all the issues it raises. By the way, the interest of this device is reinforced, in parallel with our demonstration, by our participation in an oral presentation of this interface and its specificity at the conferences of Siggraph”, explains Jean-Baptiste de la Rivière, R&D Manager.

Learn more: read the whole R&D article of the Summer 2010 newsletter.

The HoloCubtile at Futuroscope: art within reach

2010-06-25T10:58:00.000-07:00

We already presented the HoloCubtile (read the note about Laval Virtual 2010 or the R&D article in the newsletter from March), an augmented reality device which associates a tactile cube whose 5 faces are multitouch with a mirror in which visitors can see themselves manipulating objects, blending thus visualization and interaction spaces.

Futuroscope, the French second theme park, has just acquired the first copy of the HoloCubtile, few months after it had been introduced to the general public; it will be presented at the “Jardin des Arts” exhibition that started at the beginning of July. Carried out in partnership with Maïf Fund for Education, this permanent exhibition will last at least 3 years: all visitors – the young and old – will discover in a fun and innovative way 4 work of arts that leaved their marks on art history, among which Tutankhamun's mask and the Venus de Milo.

In the Digital City, Futuroscope space dedicated to relax or make new experiences between two attractions, the HoloCubtile aims at surprising visitors, bringing art within reach of everyone. This tactile experience in Augmented Reality permits in particular a more intuitive approach of sculptures, revolutionizing thus the relationship between art and visitors.

International Fair of Bordeaux: a 3D walk right in the middle of the city with the Cubtile

2010-05-10T05:44:00.000-07:00

On the occasion of the International Fair of Bordeaux which opens the 8th of May at Bordeaux Lac Exhibition Center, Bordeaux Town Council appeals to 3 innovative companies from Bordeaux on its booth “Bordeaux digital city”, one of which is Immersion.

In association with 360 CityScape, creator of virtual visits and interactive guides, and with SC2X, expert in 3D processing, interactivity and video games, Immersion offers to visitors a 3D walk on Pey-Berland square. Touching the faces of the Cubtile, they will be able to walk virtually right in the middle of Bordeaux, intuitively and in high resolution.

A 3D panoramic walk right in the middle
of Bordeaux (copyright: 360 CityScape).

This new kind of digital experience has been carried out by Bordeaux Town Council within the framework of the project “Bordeaux digital city”. Bordeaux Town Council is indeed developing several services, equipments and projects for and with inhabitants of Bordeaux, appealing in particular players of the local digital world. Within the framework of the International Fair of Bordeaux, this project leads to the presentation of a selection of multimedia and digital animationsat the state-of-the-art, with an overview of the savoir-faire of companies and associations from Bordeaux, that excel in NICT.

“Confronting our innovations to the general public is the ultimate test for us, all the more on the Council Town booth that will attract a lot of people!” says Christophe Chartier, CEO of Immersion. “The Cubtile is indeed intended for the general public in museums or real estate agencies for example, by the way it’s already done at Cap Sciences”, he adds (Shed 20 – Quai de Bacalan).

Meet us from the 8th to the 17th of May on Bordeaux Town Council booth (Hall 1, path B, Gate 8 or 10).

Laval Virtual 2010: a leader booth in the field of Virtual Reality for Immersion

2010-04-21T05:13:00.000-07:00

The Holocubtile wasn’t the only one innovation on Immersion booth this year. In partnership with other companies of the sector, many multitouch and visual solutions have been shown to the public, illustrating the will of Immersion to be a major actor of Virtual Reality.

projectiondesign offered an exclusive demo of a projection solution using LED technology (energy economical and long lifespan lights) that permits high quality warping and blending on a wave screen, thanks to MIPS (Multi Image Projection System).

MIPS fits to a projection on any type of surface

Two other exclusive new things on Immersion booth: the NavShoe from Intersense, that permits position tracking of people without any preexisting external reference (GPS…); regarding the PPT Eyes and PPT Wand tracking device from WoldViz (Precision Position Tracking), it offers a stereoscopic interactive immersion from Infitec at an affordable cost, working with a projectiondesign projection kit.

PPT tracking from WorldViz, an affordable solution ready-to-use

Four other demonstrations have been supporting the savoir-faire from Immersion and its partners on the booth, one of which is the Quad HD high resolution display set from Mitsubishi Electric. A 56 inches Quad HD high resolution screen (3840x2160 pixels) associated with the NVIDIA QuadroPlex offers a very realistic visualization of a great quality.

The Quad HD screen can be used for design or project review for example
(photo copyright: JC Druais / Laval Virtual 2010)

Highly developing, auto-stereoscopy was also present on Immersion booth with Alioscopy latest 3D screen (47 inches), whose technology permits three-dimensional visualization without wearing specific glasses.

Regarding HMD (Head Mounted Displays), Sensics showed the xSight 6123 HMD, that is an ingenious mix between panoramic and high resolution display modules, and a lightweight design.

The xSight 6123 from Sensics, a mobile immersive solution
(photo copyright: Sensics)

The CyberGlove II from CyberGlove Systems is a wireless dataglove that captures hand motions precisely thanks to 22 sensors, offering a motion reproduction as before.

Laval Virtual and its 3400 professional visitors have been once again a great time for the whole Immersion team and its partners. Next meeting from 6 to 10 April 2011 fort the 13th International Conference on Virtual Reality!

Immersion impresses with the HoloCubtile at Laval Virtual 2010

2010-04-19T07:16:00.000-07:00

At the occasion of the 12th International Conference on Virtual Reality which took place from 7 to 11 April in Laval (Mayenne), Immersion team showed its latest innovations during the professional exhibition.
Last year, the Cubtile (still at the prototype stage) was awarded in Laval by the « Science and Education » trophy, thanks to its playful approach of culture. This year, Immersion pushed once more the limits of user experience and impressed in unveiling for the first time in Europe the HoloCubtile. Professional visitors discovered the tactile cube in its enriched version with augmented reality : “The HoloCubtile is an augmented reality device that makes use of a mirror to blend the visualization and interaction spaces”, explains Jean-Baptiste de la Rivière, R&D department manager at Immersion. According to many visitors, the result is amazing: with an almost-holographic visualization, the HoloCubtile seduces by its many uses in the cultural or educational framework, as a New-York Times article emphasized.

Demonstration of the HoloCubtile at Laval Virtual 2010 from Immersion

InSTInCT project: rethink the tactile in all its dimensions

2010-03-08T08:09:00.000-08:00

In recent years, the massive use of tactile surfaces like iPhone has revolutionized uses and user interfaces, but these interactions are mostly two-dimensional, and are rarely in a three-dimensional space. This observation was the starting point of the InSTInCT project (French acronym for interfaces dedicated to tactile surfaces for interaction with threedimensional content) which began in fall 2009. Co-financed by the French National Research Agency, it aims at developing effective techniques for an intuitive touch interaction between a user and an interactive 3D environment.

For three years, research teams from INRIA, Immersion and Cap Sciences will ponder the opportunities to increase the dissemination of interactive 3D technologies, from professional uses to general public uses (public places like museum, classroom, station concourse…):

Research teams from IPARLA (INRIA) bring their expertise in the area of interfaces, human factors, interactive 3D technologies or computer vision.

Research teams from ALCOVE share their overall vision of 3D interaction modes (links between the interface, electrical engineering and ergonomics).

Cap Sciences ensures to take constantly into account needs and constraints for consumer use, and brings an evaluation and validation of the proposed approaches in actual conditions of use.

Immersion brings its expertise in the development of innovative peripherals and takes charge of the realization of prototypes that are in line with the market.

You can highlight the innovative and ambitious nature of the InSTInCT project, whose multidisciplinary approach is facilitated by the collaboration between those partners from different backgrounds, but who share the desire to look for hardware technologies as much as interaction techniques or new uses related to 3D applications. The InSTInCT project is divided into three research areas:

technologies: hardware and software techniques to develop efficient tactile devices (improvement of existing technologies and innovative devices designing).

interaction techniques: methods and approaches that will be developed to produce 3D interaction tasks (manipulation of objects, virtual camera...). There is currently very little interaction techniques dedicated to the tactile surfaces that have been designed for 3D use.

uses: final applications in which many needs and constraints must be taken into account (cultural, economic, environmental and societal). The project will focus on a narrow range of general public oriented applications (exhibitions and museums), but the mechanisms of interaction can also adapt to professional needs.

Links between different research areas of InSTInCT.

During the first months of the project, an initial test platform has been installed at Cap Sciences (Bordeaux) to get feedbacks from users. The Cubtile from Immersion effectively allows the manipulation of the model of the future drawbridge from Bordeaux, with a display on a remote screen. This first experimental phase will be followed by a phase of analysis and the launch of research. The project will end with the capitalization of reached results through new interfaces that will integrate retained improvements and innovations.

Throughout the project, InSTInCT players will be very keen to communicate and highlight obtained results, both in academic and scientific field (ta king part in publications or conferences) or with different players of virtual reality, computer graphics and human-machine interfaces (organization of workshops in order to position the project as a leader in this emerging theme). Dissemination to the general public is an inherent requirement of the project: InSTInCT players will constantly meet this need through the devices showed, but also through meetings or through the project website which will present a project monitoring in real time.

Immersion and Arkhênum highlight cultural heritage at SIMESITEM 2010

2010-02-01T02:32:00.000-08:00

The SIMESITEM 2010, fourteenth edition of the fair of development and equipment of cultural places, which takes place in Paris from the january 26th to the 28th, gives rise to Immersion to associate with Arkhênum, expert company in digitisation, on-lining and hosting of cultural heritage collections.
In addition to conferences and workshops, SIMESITEM welcomes this year more than a hundred exhibitors, one of which is Arkhênum to show cultural heritage collections on the iliGHT touch table developed by Immersion (medieval manuscript, incunabulum, Claude Nougaro’s notebooks…). Visitors shall also leaf through in 3D manuscripts on an interactive terminal (innovation prize awarded to Arkhênum at SITEM 2005).
This collaboration between the two companies coming from Bordeaux shows the will of Arkhênum to come within an innovative approach of highlighting of heritage, and the growing interest of Immersion in cultural market.

Immersion and Arkhênum team up and bet
on innovation to highlight heritage.

Cubtile in favour in Télématin

2010-01-19T07:23:00.000-08:00

A report dedicated to Cubtile has been broadcasted january 14th in Télématin TV program, presented every day on France 2 by William Leymergie. Described as a « revolutionary innovation in the tactile universe », Cubtile was the subject of a short report intended for general public. The commentator Yann Lavoix, spécialized in new technologies, stressed in particular the easiness of its handling, mentioning many examples of possible applications (submarine space layout, car purchasing, in musuem…). This report was also the opportunity for Christophe Chartier, co-founder and CEO of Immersion, to show Cubtile and talk about its various uses, handling many 3D models (Formula 1, molecule, Eiffel Tower, apartment…). Those few minutes in a generalist broadcast really shows the interest of this device as a professional solution, but also its applications aimed to the general public.

Demonstration of Cubtile by Christophe Chartier
(Photo credit : France 2/Télématin).

Watch the report (french).

Cubtile : the future Bordeaux lift bridge in 3D

2009-12-15T01:40:00.000-08:00

As the foundations for the Bacalan-Bastide lift bridge were laid in Bordeaux, an “observation kiosk” of the building opened its doors on Wednesday, December 9, in the premises of Cap Sciences (Hangar 20). During all the building work, almost three years, a device using the Cubtile will permit to superimpose virtual depictions from the future bridge to real time Garonne’s pictures. The objective is to permit the general public to discover in an interactive way the work as it will finally be in autumn 2012. Moreover, this augmented reality installation also permits to display the lift bridge in action: touching the tactile faces of the cube, the user can easily interact on screen with the mobile span of the bridge.
This installation is the result from the collaboration of Immersion with Cap Sciences, Alcove and IPARLA Team (INRIA) within the framework of the national research project Instinct (for more information, see this page): it was the opportunity for Immersion to develop a 3D application which is accessible to the general public using the Cubtile, but it was above all the first time that the tactile device is given to the general public.
The baptism of fire of this bold augmented reality device took place successfully in the presence of the various local politicians (Alain Juppé – Bordeaux mayor, Vincent Feltesse – CUB chairman and other local politicians). This display solution for the future bridge, which is called to evolve over the building work, will definitely seduce the inhabitants of Bordeaux.

Cubtile’s adventure : from the concept to the finished product

2009-12-15T00:52:00.000-08:00

The recent announcement of the commercialization of the Cubtile (more informations on http://www.cubtile.com/index.php?lang=en) is a new step for Immersion in the development of this long-term innovative project. All this time, Immersion team never stopped improving the Cubtile, as far as equipment is concerned, but also regarding interactions or display modes.

Technical improvements permitted for example the upgrade of the reactivity of tactile faces or the recognition process of movements: illimited contact points, better data acquisition frequency…
Regarding use improvements, Immersion R&D Team worked to give birth to the most intuitive tactile interface possible; 3D contents handling or navigation is now accessible to the most of us : translation movements, definition of rotation axes or zoom shot in 3D have never been so easy!
New solutions have also been found concerning display modes: possible depictions come in a variety according to the different applications of the Cubtile (industry, research, culture…), and the contributions as regards 3D volumes perception or navigation in a virtual environment are huge.

The commercialization of the Cubtile is so the opportunity for Immersion to measure the progress made since the birth of the concept of the tactile cube to its presentation to the general public. Adapted to many professional uses as well as general public applications, the Cubtile keeps on arousing anyone’s curiosity: it has never been so discussed on blogs and websites or in press, and is at the present time presented for the first time to the general public within the framework of an exhibition on the building site of the Bacalan-Bastide lift bridge in Bordeaux. This project is an example of the tactile technologies “democratization” wanted by Immersion in order to offer a new approach of virtual reality.

CARE Project: Augmented Reality applied to the cultural domain

2009-12-14T07:35:00.000-08:00

CARE, acronym of “Cultural experience: Augmented Reality & Emotion”, is a research project selected and cofinanced by the French Research Agency (Agence Nationale de la Recherche - ANR), whose Immersion is the coordinator. Launched in the end of 2007, it should end in 2010, and aims at applying Augmented Reality techniques to the cultural domain.

Combining human emotion and Augmented Reality techniques, CARE project took up the challenge to find appropriate hardware and software solutions to develop interaction spaces between public and culture.

The collaborative and multidisciplinary work of the 7 partners involved in the project (Immersion, ESTIA, IRIT, LIMSI, Metapages, Laboratoire Informatique de Grenoble & Gipsa-lab, Université de Technologie de Troyes) led up among other things to 2 concrete applications:

- Ballet of Biarritz: create a show in which the dancer and its shadow could act differently, to reinforce the emotional exchange between the artist and the audience ;

- Muséum of Natural History of Toulouse: make abstract concepts related to natural evolution become accessible and lively for the general public.

CARE project also permitted Immersion to focus on the possible applications of innovative tactile interfaces. Progressively, making use of the iliGHT multitouch technology and adapting it to the ergonomic requirements of the CARE project, the R&D team of Immersion improved the original concept of the Cubtile, offering an Augmented Reality solution perfectly in line with the constraints of the cultural domain (no head-mounted display required, intuitive handling, device accessible to the great majority of people).

Forum of the Actors of Digital technology 2009: Immersion presents the professional solutions of tomorrow

2009-12-14T07:27:00.000-08:00

During the third edition of the Forum of the Actors of Digital technology (FAN 2009) on September 29th and 30th, Immersion presented on its stand two of its flagship products:

The tactile cube Cubtile™, first 3D multi-touch device in the world, which offers infinite applications in terms of interaction and display of 3D objects in an intuitive way.

Click on the picture to read the article and watch the movie from La Tribune.

The interactive iliGHT™ touch table, which uses gestures (G), the hand (H) and touch (T), and offers an innovative workspace to collaborate around the same project.

Demonstration of the iliGHT touch table to a journalist.

The 2009 edition of the Forum of the Actors of Digital technology thus permitted Immersion to take its place within the "Innov Business / Company 2.0" space, which focused on the use of digital technology in tomorrow’s companies.

Laval Virtual 2009 : Cubtile™ wins the "Science and Education" trophy

2009-12-14T07:17:00.000-08:00

During the 11th international maeeting of virtual reality which took place in Laval at the end of April, Immersion team displayed its last innovations on several stands. A few months only after its world premiere presentation at Imagina show (see previous article), Cubtile™ was already awarded a prize, allowing Immersion to win the “Science and Education” trophy, thanks to its playful approach of culture.
First 3D multi-touch device in the world, this tactile cube allows people to handle intuitively 3D contents and to display the depiction on a screen. Awarded by the jury of one of the most important European shows dedicated to virtual reality, this first reward confirms the strong potential of Cubtile™.

(Crédit : Laval Virtual 2009 / Jean-Charles Druais)

Imagina 2009 : Immersion enhances the 3D technologies

2009-12-14T06:42:00.000-08:00

From 4 till 6 February was held in Monaco the Imagina 2009 show, a significant European event which gathers together the major actors of virtual reality. Immersion team took advantage of this opportunity to show to the visitors the Cubtile ™ (see previous articles), as well as a new version of the iliGHT™ touch table, whose last features held attention of the public: It is now possible to read videos and the multi-touch interface has been improved so that it’s able to recognize 80 fingers and more forms, allowing interactions (movements, zoom…) which have never been so fluid and intuitive.

Video which shows the new features of the iliGHT touch table, in particular the remote control of a security camera (source: Clubic).

Pictures of the iliGHT table

2009-01-06T02:20:00.001-08:00

Navigation on Google Earth with the iliGHT CubTile

2009-01-06T02:18:00.002-08:00

Visualization of a brain MRI

2009-01-06T02:18:00.001-08:00

The iliGHT CubTile

2009-01-06T02:16:00.000-08:00

The tactile cube is one of the iliGHT project innovative results. It is based on a tactile manipulation performed in 3 dimensions, which allows to go beyond the single flat 2 dimensions surface associated with the classical tactile tables.

Diverse applications

2009-01-06T02:15:00.001-08:00

A wide range of applications can benefit from our multitouch technology, like 3D visualization or high definition 2D pictures manipulation and scaling. Our SDK offers a whole set of tools that help to quickly and efficiently integrate our system into your application.

Google Earth Application

2009-01-06T02:14:00.000-08:00

The interface is entirely rendered in 3D, and as the video below shows, the Google Earth sphere can be manipulated in each direction with one or several fingers, which definitely makes the manipulation much easier and natural.

Supreme Commander Demo

2009-01-06T02:12:00.004-08:00

The video below illustrates the usefulness of an interactive tactile surface in a strategy video game application. It enables both global and local visualization as well as an interface which is actually brought at hand, offering to play on different scales and making the motion in the game area and control much easier and effective.

3D spider

2009-01-06T02:12:00.003-08:00

Crayon Physics

2009-01-06T02:11:00.000-08:00

This movie illustrates a strategy game that relies on interactive drawing and 2D physics to solve complex puzzle games. Developed by Petri Purho, its principle is well adapted to our multitouch table which offers both the tactile intuitivity and a collaborative puzzle solving platform, mixing real objects (the fingers) and virtual objects (the hand-drawn shapes) into an interactive game board.
For more information about this application : http://www.crayonphysics.com/

Picture manipulation

2009-01-06T02:10:00.001-08:00

Design of the iliGHT table

2009-01-06T01:48:00.000-08:00

The iliGHT table is fully customizable and adaptable according to your needs, as well concerning the design (form shape, colour, logos, etc.), as the dimensions or the render.

Product brief

2009-01-06T01:46:00.000-08:00

2009-01-06T01:40:00.000-08:00

iliGHT is a project that aims at developping new interactive multimodal interfaces. This interactive table offers a huge multitouch and multi-user display and provides different services.